ASTM A53 Pipe & ASME AS53 Pipe

Astm A53 Schedule 40 Steel Pipe, ASTM A53 Grade B ERW Pipe Stockist

ASTM A53 is a carbon steel alloy, used as structural steel or for low-pressure plumbing. The alloy specifications are set by ASTM International, in specification ASTM A53/A53M.

A53 pipe comes in three types and two grades, A53 Type F, which is longitudinally furnace butt welded or continuous welded (Grade A only), A53 Type E, which is longitudinally electric resistance welded (Grades A and B), and A53 Type S, which is seamless pipe, produced by hot working, and possibly cold finishing, the steel (Grades A and B). ASTM A53 pipe is sized according to the nominal pipe size (NPS) system. It is commonly available with national pipe thread ends or with plain cut ends. It can be used for steam, water, and air conveyance. It is also weldable and can be used in structural applications, although ASTM A500 tube, which is available in the same NPS sizes, is sometime preferred.

This is a standard set by the standards organization ASTM International, a voluntary standards development organizations that sets technical standards for materials, products, systems, and services.

ASTM A53 Standard- 06A – HYSP
1. Scope of ASTM A53 Standard ASTM A53 is standard specification for pipe, steel, black and hot dipped, zinc-coated, welded and seamless. This specification covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1⁄8 to NPS 26 [DN 6 to DN 650] (Note 1), inclusive, with nominal wall thickness (Note 2) as given in Table X2.2 and Table X2.3. It shall be permissible to furnish pipe having other dimensions provided that such pipe complies with all other requirements of this specification.Supplementary requirements of an optional nature are provided and shall apply only when specified by the purchaser.
2. Application of ASTM A53 Standard Pipes Steel Pipes ordered under this specification is intended for mechanical and pressure applications and is also acceptable for ordinary uses in steam, water, gas, and air lines. It is suitable for welding, and suitable for forming operations involving coiling, bending, and flanging.
3. Types and Grades This specification covers the following types and grades:
3.1 Type F—Furnace-butt-welded, continuous welded Grade A.
3.2 Type E—Electric-resistance-welded, Grades A and B,
3.3 Type S—Seamless, Grades A and B.
Note:
Type F is not intended for flanging.
If Type S or Type E is required for close coiling or cold bending, Grade A is the preferred grade; however, this is not intended to prohibit the cold bending of Grade B pipe.
Type E is furnished either nonexpanded or cold expanded at the option of the manufacturer.
4. Materials and Manufacture of ASTM A53 Pipes
4.1 The steel for both seamless and welded pipe shall bemade by one or more of the following processes: open-hearth, electric-furnace, or basic-oxygen.
4.2 If steels of different grades are sequentially strand cast, identification of the resultant transition material is required. The steel producer shall remove the transition material by any established procedure that positively separates the grades.
4.3 The weld seam of electric-resistance welded pipe in Grade B shall be heat treated after welding to a minimum of 1000 °F [540 °C] so that no untempered martensite remains, or otherwise processed in such a manner that no untempered martensite remains.
4.4 When pipe is cold expanded, the amount of expansion shall not exceed one and one-half percent (1-1⁄2%) of the specified outside diameter of the pipe.
APPLICATIONS
ASTM A53 pipeline is planned for mechanical as well as pressure applications and also is also appropriate for ordinary usages in vapor, water, gas and also air lines.

ASTM A53 Steel Pipe Specifications

Standard Specification for Pipe, Steel, Black and Hot-Dipped, Zinc-Coated, Welded and Seamless

ASTM A53 (ASME SA53) carbon steel pipe is a specification that covers seamless and welded black and hot-dipped galvanized steel pipe in NPS 1/8″ to NPS 26.  A 53 is intended for pressure and mechanical applications and is also acceptable for ordinary uses in steam, water, gas, and air lines.

A53 pipe comes in three types (F, E, S) and two grades (A, B).

A53 Type F is manufactured with a furnace butt weld or may have a continuous weld (Grade A only)

A53 Type E has an electric resistance weld (Grades A and B)

A53 Type S is a seamless pipe and found in Grades A and B)

A53 Grade B Seamless is our most polar product under this specification and A53 pipe is commonly dual certified to A106 B Seamless pipe.

Federal Steel Supply has a full range of stock in A53 steel pipe (SA53 steel pipe) in:

Grade B

Sizes

NPS ¼” to NPS 26” O.D.

Wall thickness: Schedules 10 through 160, STD, XH and XXH
Commonly requested unscheduled walls up to 4” and certified minimum wall items

Mechanical Properties

Grade A                     Grade B                     

Tensile Strength, min., psi, (MPa)                   48,000 (330)                60,000 (415)

Yield Strength, min., psi, (MPa)                     30,000 (205)                35,000 (240)

Carbon Steel Pipe Astm A53 Grade b Pipe, A53 Seamless Pipe Exporter

ASTM A53 Grade A, ASME SA53 Grade B, A53 ERW Pipe In India

A53 Grade A Pipe Stockist, Astm A53 Grade B Erw Pipe Manufacturer

A53 Seamless Pipe Supplier In USA, SA53 Steel Pipe In Canada & Australia

ASTM A53 Schedule 40 Seamless Steel Pipe, ASTM A53 Grade B ERW Pipe Supplier

Astm A53 Schedule 10 Pipe, Astm A53 Type E Grade B Pipe Stockholder

A53 Galvanized Pipe Stockist, SA53 Pipe Manufacturer, SA53 Seamless Pipe Supplier

A53 Pipe Specification, A53 Grade B Pipe Specification, Sa53 Pipe Dimensions, A53 Grade B Pipe Sizes

Chemical Composition Of A53 Pipes & Tubes & SA53 Pipes & Tubes, ASTM A53 / SA53 Grade A & B Pipes & Tubes, Type F, E & S Pipes & Tubes

Astm A53 Pipe Properties, Astm A53 Grade B Pipe Properties, Sa53 Pipe Mechanical Properties

ASTM A53 Welded Pipes, A53 Boiler Tubes, SA53 Heat Exchanger Pipe, ASME SA53 Condenser Tubes

Types Of SA 53 Tubes & A 53 Tubes

Marking & Packing Of SA 53 & A 53 Heat Exchanger Pipes & Tubes